SIPSPEAKER FLUSH LOUDSPEAKER SET

The 2N 914430E is an IP-addressable 6W Loudspeaker – part of the 2N SIP Speaker Audio-over-IP range which provides a new concept in paging / public address distribution and control over the internet or via LAN / WAN connections.

This flush-mount IP Speaker is connected to a LAN, WAN or web network and will distribute high quality voice paging from another IP-connected device such as an IP telephone.

Featuring Mic and Line out, each SIP Speaker device can also be connected to an additional PA Amplifier for IP Paging distribution to larger zones and loudspeaker groups.

The 2N SIP Speaker system provides a cost effective and highly flexible new solution to Public Address distribution and is also ideal for safety and security systems, particularly when used in conjunction with the 2N Helios range of IP Access Control products.

The 914403E SIP Speaker can be deployed on an existing or new network infrastructure either as a simple IP Public Address System or as a two-way interface using the device’s on-board Microphone input.

Featuring Session Initiation Protocol (SIP) and Multicast, the system has the ability to send voice announcements to any number of SIP Speaker devices on the system, selecting individual end-points or all devices simultaneously.

SIP Speaker Key Functions / Benefits:

• Multicast –
Multicast allows for fast, simple configuration of an unlimited number of end-point devices to simultaneously receive the same broadcast signal.

• Real Time Audio Streaming –
The 2N SIP Speaker device features an on-board microphone input, allowing an audio stream from a local microphone to be distributed over the IP system to another device (such as a DVR recorder). For example, the SIP Speaker can be combined with a CCTV camera to receive and send additional audio from a connected microphone back to the DVR or security office.

• Remote Control of Switches –
This device includes an on-board Logic Switch Input / Outout, allowing the SIP Speaker to be activated from an additional connected system (for example a control panel or IP phone connected to the system could activate a remote locking mechanism connected to the SIP Speaker device).

• IP Relay –
The 2N SIP Speaker also provides IP Relay signal, allowing for communication to separate devices via HTTP.

*End-Point License Keys
Please note that license keys may need to be purchased based on the number of IP End Points on the system.